×
近期发现有不法分子冒充我刊与作者联系,借此进行欺诈等不法行为,请广大作者加以鉴别,如遇诈骗行为,请第一时间与我刊编辑部联系确认(《中国物理C》(英文)编辑部电话:010-88235947,010-88236950),并作报警处理。
本刊再次郑重声明:
(1)本刊官方网址为cpc.ihep.ac.cn和https://iopscience.iop.org/journal/1674-1137
(2)本刊采编系统作者中心是投稿的唯一路径,该系统为ScholarOne远程稿件采编系统,仅在本刊投稿网网址(https://mc03.manuscriptcentral.com/cpc)设有登录入口。本刊不接受其他方式的投稿,如打印稿投稿、E-mail信箱投稿等,若以此种方式接收投稿均为假冒。
(3)所有投稿均需经过严格的同行评议、编辑加工后方可发表,本刊不存在所谓的“编辑部内部征稿”。如果有人以“编辑部内部人员”名义帮助作者发稿,并收取发表费用,均为假冒。
                  
《中国物理C》(英文)编辑部
2024年10月30日

Analytical System Modeling Method for SPECT Based on the Boltzmann Transport Equation

  • In single photon emission computed tomography (SPECT), accurately modeling of the physics of SPECT imaging process is essential to degrading factor compensation and image quality enhancement. In this paper, an analytical SPECT modeling method is proposed based on the theory of the Boltzmann transport equation and its Neumann series solution. The analytical model was numerically evaluated using high dimensional integration algorithm based on number theory. SPECT projection images for both uniform cylinder phantom with point source and NCAT phantom were calculated and compared with those which were generated by conventional Monte-Carlo modeling methods. Results show that the analytical modeling method demonstrates improved performance in computation accuracy and speed relative to the Monte-Carlo method, as well as the advantage that the computational results of the analytical method are free from statistical noise. Therefore, we conclude that the analytical method is more appropriate for modeling the SPECT imaging process than Monte-Carlo modeling methods.
  • 加载中
  • [1] . PEI Lu-Cheng, ZHANG Xiao-Ze. Monte Carlo Method and Application in Particle Transport Problem. Beijing: Sci-ence Press , 1980. 213-233(in Chinese)(裴鹿成,张孝泽.蒙特卡罗方法及其在粒子输运问题中的应用.北京:科学出版社,1980.213—233)2. Boman E, Tervo J, Vauhkonen M. Phys. Med. Biol., 2005,50: 265-2803. MA Tian-Yu, JIN Yong-Jie. Efficient Analytical Scatter Modeling in Fully 3-D Iterative Single Photon Emission Computed Tomography Reconstruction. In: IEEE Nucl.Sci. Symp. Med. Imag. Conf. Rec. Piscataway. NJ: IEEEPress, 2003. 2647-26514. MA Tian-Yu, JIN Yong-Jie. J. Tsinghua Univ. (Sci. Tech.), 2003, 43(10): 1359-1362(in Chinese)(马天予,金永杰.清华大学学报(自然科学版),2003,43(10):1359—1362)5. Harrison R L, Vannoy S D, Haynor D R et al. Preliminary Experience with the Photon History Generator Module of a Public-Domain Simulation Systems for Emission Tomog-raphy. In: IEEE Nucl. Sci. Symp. Med. Imag. Conf. Rec.Piscataway. NJ: IEEE Press, 1993. 1154-11586. Segars W P. Development and Application of the New Dy-namic NURBS-based Cardiac- Torso (NCAT) Phantom.PhD Thesis. The University of North Carolina at Chapel Hill, 2001.
  • 加载中

Get Citation
MA Tian-Yu and JIN Yong-Jie. Analytical System Modeling Method for SPECT Based on the Boltzmann Transport Equation[J]. Chinese Physics C, 2006, 30(8): 806-811.
MA Tian-Yu and JIN Yong-Jie. Analytical System Modeling Method for SPECT Based on the Boltzmann Transport Equation[J]. Chinese Physics C, 2006, 30(8): 806-811. shu
Milestone
Received: 2005-11-08
Revised: 2006-01-13
Article Metric

Article Views(1502)
PDF Downloads(635)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, [email protected]
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

Analytical System Modeling Method for SPECT Based on the Boltzmann Transport Equation

    Corresponding author: MA Tian-Yu,
  • Department of Engineering Physics, Tsinghua University, Beijing 100084, China

Abstract: In single photon emission computed tomography (SPECT), accurately modeling of the physics of SPECT imaging process is essential to degrading factor compensation and image quality enhancement. In this paper, an analytical SPECT modeling method is proposed based on the theory of the Boltzmann transport equation and its Neumann series solution. The analytical model was numerically evaluated using high dimensional integration algorithm based on number theory. SPECT projection images for both uniform cylinder phantom with point source and NCAT phantom were calculated and compared with those which were generated by conventional Monte-Carlo modeling methods. Results show that the analytical modeling method demonstrates improved performance in computation accuracy and speed relative to the Monte-Carlo method, as well as the advantage that the computational results of the analytical method are free from statistical noise. Therefore, we conclude that the analytical method is more appropriate for modeling the SPECT imaging process than Monte-Carlo modeling methods.

    HTML

Reference (1)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return