Error analysis and lattice improvement for the C-ADS Injector-Ⅰ

MENG Cai; LI Zhi-Hui; TANG Jing-Yu

doi:10.1088/1674-1137/38/6/067008

Chinese Physics C> 2014, Vol. 38> Issue(6) : 067008 DOI: 10.1088/1674-1137/38/6/067008

Error analysis and lattice improvement for the C-ADS Injector-Ⅰ

Abstract
HTML
Reference
Related

PDF

Abstract：
The injector Scheme-Ⅰ (or Injector-Ⅰ) of the C-ADS linac is a 10 mA 10 MeV proton linac working in CW mode. It is mainly comprised of a 3.2 MeV room-temperature 4-vane RFQ and twelve superconducting single-spoke cavities housed in a long cryostat. Error analysis including alignment and field errors, and static and dynamic ones for the injector are presented. Based on detailed numerical simulations, an orbit correction scheme has been designed, which shows that with correction the rms residual orbit errors can be controlled within 0.3 mm and a beam loss rate of 1.7× 10^-6 is obtained. To reduce the beam loss rate further, an improved lattice design for the superconducting spoke cavity section has been studied.

References

[1]

TANG J Y, LI Z H et al. Conceptual Physics Design on the C-ADS Accelerators. IHEP-CADS-Report/2011-1E[2] Ostroumov P N, Aseev V N, Mustapha B. Physical Review Special Topics-Accelerators and Beams, 2004, 7: 090101[3] Gerigk F et al. Conceptual Design of the SPL II - A High-Power Superconducting H- Linac at CERN, CERN. 2006[4] Jungwirth H. Conceptual Design Report - The Superconducting Injector Linac for the Cooler Synchrotron COSY. Match 2002. 22[5] Aune B et al. Technical Report of ESS - The Linac. Volume III, 2002. 111-114[6] Sato S et al. Proceedings of PAC07, 2007. 4072-4074[7] LI Zhi-Hui, CHENG Peng et al. Physics Design of an Accelerator for an Accelerator-Driven Subcritical System. Physical Review Special Topics-Accelerators and Beams, 2013, 16: 080101

[1]	Xue-Fang Huang , Yi Sun , Guang-Wei Wang , Shao-Zhe Wang , Xiang Zheng , Qun-Yao Wang , Rong Liu , Hai-Ying Lin , Mu-Yuan Wang . Measurement of the transfer function for a spoke cavity of C-ADS Injector I. Chinese Physics C, 2017, 41(4): 047001. doi: 10.1088/1674-1137/41/4/047001
[2]	Zhou Xue , Jian-Ping Dai , Cai Meng . A new method for compensation and rematch of cavity failure in the C-ADS linac. Chinese Physics C, 2016, 40(6): 067003. doi: 10.1088/1674-1137/40/6/067003
[3]	Jing Wang , Jian-Long Huang , Xiao-Qi Zhang , Bin Zhang , Yuan He , Zhou-Li Zhang , Ai-Min Shi . Frequency tuning with RFQ temperature in China ADS Injector Ⅱ. Chinese Physics C, 2016, 40(3): 037003. doi: 10.1088/1674-1137/40/3/037003
[4]	Zaki Dizaji . Energy response improvement for photon dosimetry using pulse analysis. Chinese Physics C, 2016, 40(2): 026203. doi: 10.1088/1674-1137/40/2/026203
[5]	Wei-Long Chen , Zhi-Jun Wang , Chi Feng , Wei-Ping Dou , Yue Tao , Huan Jia , Wang-Sheng Wang , Shu-Hui Liu , Yuan He . Beam-based calibrations of the BPM offset at C-ADS Injector Ⅱ. Chinese Physics C, 2016, 40(7): 077003. doi: 10.1088/1674-1137/40/7/077003
[6]	Na Liu , Yi Sun , Guang-Wei Wang , Zheng-Hui Mi , Hai-Ying Lin , Qun-Yao Wang , Rong Liu , Xin-Peng Ma . Tuner control system of Spoke012 SRF cavity for C-ADS injector I. Chinese Physics C, 2016, 40(9): 097001. doi: 10.1088/1674-1137/40/9/097001
[7]	HUANG Liang-Sheng , Yoshiro Irie , LIU Yu-Dong , WANG Sheng . Mode error analysis of impedance measurement using twin wires. Chinese Physics C, 2015, 39(3): 037003. doi: 10.1088/1674-1137/39/3/037003
[8]	MENG Cai , TANG Jing-Yu , PEI Shi-Lun , YAN Fang . Mismatch study of C-ADS main linac. Chinese Physics C, 2015, 39(9): 097002. doi: 10.1088/1674-1137/39/9/097002
[9]	SHI Ai-Min , SUN Lie-Peng , ZHANG Zhou-Li , XU Xian-Bo , SHI Long-Bo , LI Chen-Xing , WANG Wen-Bin . Design of the new couplers for C-ADS RFQ. Chinese Physics C, 2015, 39(4): 047004. doi: 10.1088/1674-1137/39/4/047004
[10]	SUN Biao , YAN Fang , PEI Shi-Lun , MENG Cai , TANG Jing-Yu . Compensation-rematch for the major components of C-ADS injector-I. Chinese Physics C, 2015, 39(11): 117003. doi: 10.1088/1674-1137/39/11/117003
[11]	DING Yun-Ze , DU Ying-Chao , ZHANG Zhen , HUANG Wen-Hui . Simulation study of a photo-injector for brightness improvement in Thomson scattering X-ray source via ballistic bunching. Chinese Physics C, 2014, 38(2): 027003. doi: 10.1088/1674-1137/38/2/027003
[12]	LIU Shu-Hui , WANG Zhi-Jun , YUE Wei-Ming , WAN Yu-Qin , WANG Feng-Feng , HE Yuan . Full period superconducting section physics design for injector Ⅱ of China-ADS. Chinese Physics C, 2014, 38(11): 117006. doi: 10.1088/1674-1137/38/11/117006
[13]	CHANG Wei , HE Yuan , WEN Liang-Hua , LI Chun-Long , XUE Zong-Heng , SONG Yu-Kun , ZHANG Rui , ZHU Zheng-Long , GAO Zheng , ZHANG Cong , SUN Lie-Peng , YUE Wei-Ming , ZHANG Sheng-Hu , YOU Zhi-Ming , Thomas Joseph . A vertical test system for China-ADS project injector Ⅱ superconducting cavities. Chinese Physics C, 2014, 38(5): 057001. doi: 10.1088/1674-1137/38/5/057001
[14]	YANG Xiang-Chen , PENG Quan-Ling , XU Feng-Yu , CHEN An-Bin , GAO Yao , HOU Zhen-Hua , WANG Bing . Field measurement for superconducting magnets of ADS injector Ⅰ. Chinese Physics C, 2014, 38(10): 107004. doi: 10.1088/1674-1137/38/10/107004
[15]	WANG Bing , PENG Quan-Ling , YANG Xiang-Chen , LI Shao-Peng . Current leads for superconducting magnets of ADS injector Ⅰ. Chinese Physics C, 2014, 38(6): 067004. doi: 10.1088/1674-1137/38/6/067004
[16]	REN Guang-Yi , ZENG Ming , HE Yuan , LI Yu-Xiong , LI Wei-Min . Study on the selection of BLM detector for C-ADS Injector Ⅱ. Chinese Physics C, 2014, 38(11): 117004. doi: 10.1088/1674-1137/38/11/117004
[17]	YAN Fang , LI Zhi-Hui , MENG Cai , TANG Jing-Yu , SUN Biao . Physics design for the C-ADS main linac based on two different injector design schemes. Chinese Physics C, 2014, 38(2): 027004. doi: 10.1088/1674-1137/38/2/027004
[18]	WANG Jing , HUANG Jian-Long , HE Yuan , ZHANG Xiao-Qi , ZHANG Zhou-Li , SHI Ai-Min . Multi-physics analysis of the RFQ for Injector Scheme Ⅱ of C-ADS driver linac. Chinese Physics C, 2014, 38(10): 107005. doi: 10.1088/1674-1137/38/10/107005
[19]	WANG Zhi-Jun , HE Yuan , WANG Wang-Sheng , LIU Shu-Hui , JIA Huan , LI Chao , XU Xian-Bo , CHEN Xi-Meng . End-to-end simulation of the C-ADS Injector Ⅱ with a 3-D field map. Chinese Physics C, 2013, 37(4): 047003. doi: 10.1088/1674-1137/37/4/047003
[20]	LI Zhi-Hui , TANG Jing-Yu , YAN Fang , GENG Hui-Ping , MENG Cai , SUN Biao , CHENG Peng , GUO Zhen , SUN Ji-Lei . Longitudinal instability caused by long drifts in the C-ADS injector-Ⅰ. Chinese Physics C, 2013, 37(3): 037005. doi: 10.1088/1674-1137/37/3/037005

Access

Get Citation

MENG Cai, LI Zhi-Hui and TANG Jing-Yu. Error analysis and lattice improvement for the C-ADS Injector-Ⅰ[J]. Chinese Physics C, 2014, 38(6): 067008. doi: 10.1088/1674-1137/38/6/067008

MENG Cai, LI Zhi-Hui and TANG Jing-Yu. Error analysis and lattice improvement for the C-ADS Injector-Ⅰ[J]. Chinese Physics C, 2014, 38(6): 067008. doi: 10.1088/1674-1137/38/6/067008 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2013-07-31
Revised: 1900-01-01

Article Metric

Article Views(2079)
PDF Downloads(263)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, [email protected]

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Error analysis and lattice improvement for the C-ADS Injector-Ⅰ

Corresponding author: MENG Cai,

Corresponding author: TANG Jing-Yu,

Received Date: 2013-07-31

Accepted Date: 1900-01-01

Available Online: 2014-06-05

Abstract: The injector Scheme-Ⅰ (or Injector-Ⅰ) of the C-ADS linac is a 10 mA 10 MeV proton linac working in CW mode. It is mainly comprised of a 3.2 MeV room-temperature 4-vane RFQ and twelve superconducting single-spoke cavities housed in a long cryostat. Error analysis including alignment and field errors, and static and dynamic ones for the injector are presented. Based on detailed numerical simulations, an orbit correction scheme has been designed, which shows that with correction the rms residual orbit errors can be controlled within 0.3 mm and a beam loss rate of 1.7× 10^-6 is obtained. To reduce the beam loss rate further, an improved lattice design for the superconducting spoke cavity section has been studied.

HTML

Reference (1)

Error analysis and lattice improvement for the C-ADS Injector-Ⅰ

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, [email protected]

Email This Article