Measurement of the spatial resolution and the relative density resolution in an industrial cone-beam micro computed tomography system

WANG Yan-Fang; UE Jie-Min; CAO Da-Quan; SUN Cui-Li; ZHAO Wei; WEI Cun-Feng; SHI Rong-Jian; WEI Long

doi:10.1088/1674-1137/37/7/078202

Chinese Physics C> 2013, Vol. 37> Issue(7) : 078202 DOI: 10.1088/1674-1137/37/7/078202

Measurement of the spatial resolution and the relative density resolution in an industrial cone-beam micro computed tomography system

Abstract
HTML
Reference
Related

PDF

Abstract：
The spatial resolution and the relative density resolution are the two most critical indicators in CT system. The method recommended in the ASTM E1695-95 and GJB 5311-2004 is only suitable to the fan-beam CT system. In this paper, for industrial cone-beam micro CT system, we will adopt the edge response function (ERF) created by the step edges of a steel ball to measure the system 3D PSF and MTF. To describe the contrast discrimination function more accurately, we will first propose to extend the two-dimensional measurement region to the three-dimensional space. Our experimental spatial resolution is (55.56±0.56) lp/mm and the relative density resolution is 1% within 300 μm×300 μm×300 μm according to the 3σ rule.

References

[1]

CHEN Zi-Kuan, NING Ruo-La. Proc. of SPIE, 2007. 65100F[2] E1695-1995. American Society for Testing and Material(ASTM), 1995[3] GJB5311-2004, National Military Standard (NMS), 2004[4] CHEN Z K, NING R L. Phy. Med. Bio., 2004, 49(10): 1865-1880[5] YAN Yong-Lian, LIU Li, QUE Jie-Min et al. The Tenth. Conf. on NDT Tech., 2007. 56[6] CHEN Z K, NING R L, Conover D et al. Opt. Eng., 2006, 45(9): 97003-1-11[7] Van de Casteele E, Van Dyck D, Sijbers J et al. Phy. Med. Ima., 2004, 5370: 2089-2096[8] La Feldkamp, Lc Davis, Jw Kress, J. Opt. Soc. Am. A, 1984, 1(6): 612-619[9] Canny J. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1986, PAMI-8(6): 679-698

[1]	Jian-Yong Zhang , Xiao Cai , Xiao-Hu Mo , Di-Zhou Guo , Jian-Li Wang , Bai-Qi Liu , M. N. Achasov , A. A. Krasnov , N. Yu. Muchnoi , E. E. Pyata , E. V. Mamoshkina , F. A. Harris . Upgrade of beam energy measurement system at BEPC-Ⅱ. Chinese Physics C, 2016, 40(7): 076001. doi: 10.1088/1674-1137/40/7/076001
[2]	Xiao-Yue Gu , Wei Zhou , Lin Li , Long Wei , Peng-Fei Yin , Lei-Min Shang , Ming-Kai Yun , Zhen-Rui Lu , Xian-Chao Huang . High resolution image reconstruction method for a double-plane PET system with changeable spacing. Chinese Physics C, 2016, 40(5): 058201. doi: 10.1088/1674-1137/40/5/058201
[3]	Kui-Dong Huang , Zhe Xu , Ding-Hua Zhang , Hua Zhang , Wen-Long Shi . Robust scatter correction method for cone-beam CT using an interlacing-slit plate. Chinese Physics C, 2016, 40(6): 068202. doi: 10.1088/1674-1137/40/6/068202
[4]	ZHANG Hua , HUANG Kui-Dong , SHI Yi-Kai , XU Zhe . Point spread function modeling and image restoration for cone-beam CT. Chinese Physics C, 2015, 39(3): 038202. doi: 10.1088/1674-1137/39/3/038202
[5]	YANG Min , WANG Xiao-Long , LIU Yi-Peng , MENG Fan-Yong , LI Xing-Dong , LIU Wen-Li , WEI Dong-Bo . Automatic calibration method of voxel size for cone-beam 3D-CT scanning system. Chinese Physics C, 2014, 38(4): 046202. doi: 10.1088/1674-1137/38/4/046202
[6]	FAN Xing-Ming , WANG Yi , WANG Xue-Wu , ZENG Zhi , ZENG Ming , ZHAO Zi-Ran , CHENG Jian-Ping . A position resolution MRPC for muon tomography. Chinese Physics C, 2014, 38(4): 046003. doi: 10.1088/1674-1137/38/4/046003
[7]	LI Shao-Li , HENG Yue-Kun , ZHAO Tian-Chi , FU Zai-Wei , LIU Shu-Lin , QIAN Sen , LIU Shu-Dong , CHEN Xiao-Hui , JIA Ru , HUANG Guo-Rui , LEI Xiang-Cui . Method for improving the time resolution of TOF system. Chinese Physics C, 2013, 37(1): 016003. doi: 10.1088/1674-1137/37/1/016003
[8]	LI Qi-Te , YE Yan-Lin , JI Wei , WEN Chao , LIU Hong-Tao , GE Yu-Cheng . A sub-millimeter spatial resolution achieved by a large sized glass RPC. Chinese Physics C, 2013, 37(1): 016002. doi: 10.1088/1674-1137/37/1/016002
[9]	ZHANG Fei , WANG Huan-Yu , PENG Wen-Xi , LIANG Xiao-Hua , ZHANG Chun-Lei , CAO Xue-Lei , JIANG Wei-Chun , ZHANG Jia-Yu , CUI Xing-Zhu . High resolution solar soft X-ray spectrometer. Chinese Physics C, 2012, 36(2): 146-150. doi: 10.1088/1674-1137/36/2/008
[10]	XIE Shi-Peng , LUO Li-Min . Scatter correction for cone-beam computedtomography using self-adaptive scatterkernel superposition. Chinese Physics C, 2012, 36(6): 566-572. doi: 10.1088/1674-1137/36/6/015
[11]	JIA Quan-Jie , CHEN Yu , LI Gang , JIANG Xiao-Ming . Optimization of the in-line X-ray phase-contrast imaging setup considering edge-contrast enhancement and spatial resolution. Chinese Physics C, 2012, 36(3): 267-274. doi: 10.1088/1674-1137/36/3/014
[12]	FAN Rui-Rui , CHEN Yuan-Bo , OUYANG Qun , LIU Rong-Guang , LIU Peng , QI Hui-Rong , ZHANG Jian , ZHAO Ping-Ping , ZHAO Dong-Xu , ZHAO Yu-Bin , ZHANG Hong-Yu , SHENG Hua-Yi , DONG Li-Yuan , . Study of measuring methods on spatial resolution of a GEM imaging detector. Chinese Physics C, 2012, 36(3): 228-234. doi: 10.1088/1674-1137/36/3/007
[13]	LI Yong-Ming , RUAN Xi-Chao , ZHOU Bin , MA Zhong-Yuan . Determination of the time resolution for neutron scintillation detectors by multi-coincidence measurement. Chinese Physics C, 2011, 35(5): 475-477. doi: 10.1088/1674-1137/35/5/014
[14]	ZHAO Wei , FU Guo-Tao , SUN Cui-Li , WANG Yan-Fang , WEI Cun-Feng , CAO Da-Quan , QUE Jie-Min , TANG Xiao , SHI Rong-Jian , WEI Long , YU Zhong-Qiang . Beam hardening correction for a cone-beam CT system and its effect on spatial resolution. Chinese Physics C, 2011, 35(10): 978-985. doi: 10.1088/1674-1137/35/10/018
[15]	YUE Qian , LI Yuan-Jing , YE Jin , CHENG Jian-Ping , WANG Yi , LI Jin , WU Yu-Cheng . Measurement of avalanche size and position resolution of RPCs with different surface resistivities of the high voltage provider. Chinese Physics C, 2010, 34(5): 565-570. doi: 10.1088/1674-1137/34/5/010
[16]	MO Xiao-Hu , CHU Yuan-Ping , DONG Hai-Yi , FU Cheng-Dong , LI Xiao-Nan , LIU Qian , QU Hua-Min , QIN Qing , SHEN Cheng-Ping , WANG Yi-Fang , XU Jin-Qiang , ZHANG Jian-Yong , ZHANG Qing-Jiang , ZHANG Yin-Hong , ZHANG Tian-Bao , ZHAO Zhuo . Beam energy measurement system at BEPCⅡ. Chinese Physics C, 2010, 34(6): 912-917. doi: 10.1088/1674-1137/34/6/050
[17]	YANG Min , JIN Xu-Ling , LI Bao-Lei . A new method to determine the projected coordinate origin of a cone-beam CT system using elliptical projection. Chinese Physics C, 2010, 34(10): 1665-1670. doi: 10.1088/1674-1137/34/10/022
[18]	RONG Jun-Yan , FU Guo-Tao , WEI Cun-Feng , SUN Cui-Li , WEI Long . Measurement of spatial resolution of the micro-CT system. Chinese Physics C, 2010, 34(3): 412-416. doi: 10.1088/1674-1137/34/3/022
[19]	WANG Wen-Xin , ZHANG Yi , WANG Ji-Jin , HU Bi-Tao . Study on spatial resolution of micromegas as a neutron detector under condition of high neutron flux and γ ray background. Chinese Physics C, 2009, 33(2): 110-113. doi: 10.1088/1674-1137/33/2/007
[20]	ZHOU Ri-Feng , WANG Jue , CHEN Wei-Min . X-ray beam hardening correction for measuring density in linear acceleratorindustrial computed tomography. Chinese Physics C, 2009, 33(7): 599-602. doi: 10.1088/1674-1137/33/7/018

Access

Get Citation

WANG Yan-Fang, UE Jie-Min, CAO Da-Quan, SUN Cui-Li, ZHAO Wei, WEI Cun-Feng, SHI Rong-Jian and WEI Long. Measurement of the spatial resolution and the relative density resolution in an industrial cone-beam micro computed tomography system[J]. Chinese Physics C, 2013, 37(7): 078202. doi: 10.1088/1674-1137/37/7/078202

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2012-08-31
Revised: 2012-11-06

Article Metric

Article Views(2045)
PDF Downloads(348)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, [email protected]

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Measurement of the spatial resolution and the relative density resolution in an industrial cone-beam micro computed tomography system

Received Date: 2012-08-31

Accepted Date: 2012-11-06

Available Online: 2013-07-05

Abstract: The spatial resolution and the relative density resolution are the two most critical indicators in CT system. The method recommended in the ASTM E1695-95 and GJB 5311-2004 is only suitable to the fan-beam CT system. In this paper, for industrial cone-beam micro CT system, we will adopt the edge response function (ERF) created by the step edges of a steel ball to measure the system 3D PSF and MTF. To describe the contrast discrimination function more accurately, we will first propose to extend the two-dimensional measurement region to the three-dimensional space. Our experimental spatial resolution is (55.56±0.56) lp/mm and the relative density resolution is 1% within 300 μm×300 μm×300 μm according to the 3σ rule.

HTML

Reference (1)

Measurement of the spatial resolution and the relative density resolution in an industrial cone-beam micro computed tomography system

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, [email protected]

Email This Article

Measurement of the spatial resolution and the relative density resolution in an industrial cone-beam micro computed tomography system

HTML

目录